PRODUCTS
Mini Spy Drive

 

 

User Manual

• Charging

• Power On/Off

• Taking Videos

• Taking Photos

• Voice Recording

• Motion Detection

• Time & Date Configuration

• Auto Power Off

• Connecting Drive To The Computer

 



 
Q: Charging

Please charge the pen for 1.5 hours if you are using it for the first time.

1.) Connect USB cable to connect the computer USB Port, or connect to PC directly.

2.) When the battery is charging, a blue light will be flashing. When it is fully charged, the blue light will be off.

 
Q: Power On/Off

Power on: Press and hold onto On/Off button until both blue and red light are on. At the same time, the drive shakes, when shaking stops, the initialization finished. Blue light will go off and red light will continue to lit (drive enters standby mode).

Power off: Press and hold onto On/Off button, when drive shakes and red light flashes 3 times, drive shuts down.




 
Q: Taking Videos

In standby mode, press and hold onto Camera key, when drive shakes twice and red light flashes 3 times and disappear, it begins to record.

To stop recording, press Camera key once and when drive shakes once, it will stop recording.




 
Q: Taking Photos

In standby mode, press Camera key once, when the blue light flashes, drive begins to capture photos and save file.

Image resolution :1280 * 960




 

In standby mode, press On/Off button once, when drive shakes once and blue light flashes 3 times then disappear, it starts to record.

To stop recording, press Camera key once, when drive shakes once, it will stop recording and save file.

 

In standby mode, press Motion detection key once, when drive shakes 3 times, blue and red light flash 4 times and disappear, drive enters motion detecting standby mode.

To stop recording, press Motion detection key once, when drive shakes once, it will stop recording and save automatically then enter standby mode.

 

Method 1

1.) Insert a TF card, press and hold onto Camera key to boot on this drive
2.) Power off it and connect it to your computer
3.) Open the movable disk, there is a tag.txt file, open the file and change the time to what you want, save it and exit

Method 2 (if method 1 is ok, ignore this method)

1.) Connect the machine to your computer, under the disk root directory, please create a Txt named"TIME.TXT", then open it and set the time form:
2014/01/05
12:59:30
2.) When you complete the setting, please restart the camera, it will automatically complete the time revision. And you can also use “WriteTime. Exe” file which stored in the machine to update the video time.



 
Q: Auto Power Off

When battery is low, the green light will flash about 3 seconds, then automatically saves the current image file and shuts down. When accidental faulty operation or other special reasons occur, camera stops working.

To restart the drive, press On/Off button and Camera key.

 
Q: Connecting Drive To The Computer


Connect USB cable to connect the computer USB Port, or connect to PC directly.

 





Copyright © Inkline Global. All Rights Reserved.